Wire mesh safety grip. Standard length. Galvanized steel grip. Medium duty. Bale eye type. Closed mesh. Single/double weave. 14 inch bale length. 31000 lbs approximate break strength. 6200 lbs workload safety factor. 3.5 to 3.99 inch cable range. 3.75 inch nominal grip. 5/8 inch eye size. Pulling grips are reusable tools for pulling bare conductors, insulated wires, synthetic rope, wire rope and fiber optic cable. These grips do not damage the cable, as the tension remains uniform throughout the length of the grip. The mesh responds to fit either a single cable or a bundle of cables. Grips may be used for pulling cable on overhead or underground applications, for stringing service or communication lines into factories, for pulling wire through conduit and for underground electrical pulls. Pulling grips are woven in galvanized steel for greater strength and longer life. Offers pulling kits that come in a vinyl mat with pockets that can be rolled and tied. Grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications.